The data station usually means a(71)unit that provides data for transmission, that accepts transmitted data, and that performs all functions necessary for communication with another functional unit. Data stations may be divided into two kinds, the primary stations and the secondary stations, (72)control functions.In(73)data link control, the primary station is the data station that supports the primary control functions of the data link, generates commands to be transmitted, and interprets received responses. Specific responsibilities assigned to the primary station include initialization of control signal interchange, organization of data flow and actions regarding error control and error recovery functions. The secondary station executes data link control functions as (74)by the primary station, interprets received commands and (75) responses to be transmitted.
A.performance
B.functional
C.capacity
D.quality
A.a primary station
B.one or more primary stations
C.a secondary station
D.one or more secondary stations
【C程序】
#include<stdio.h>
/*此处为栈类型及其基本操作的定义,省略*/
int main(){
STACK station;
int state[1000];
int n; /*车厢数*/
int begin, i, j, maxNo; /*maxNo为A端正待入栈的车厢编号*/
printf("请输入车厢数:");
scanf("%d",&n);
printf(“请输入需要判断的车厢编号序列(以空格分隔):”);
if(n<1)return-1;
for (i=0; i<n; i++) /*读入需要驶出的车厢编号序列,存入数组state[]*/
scanf("%d",&state[i]);
(1) ; /*初始化栈*/
maxNo=1;
for(i=0; i<n; ){ /*检查输出序列中的每个车厢号state[i]是否能从栈中获取*/
if((2) ){ /*当栈不为空时*/
if (state[i]=Top(station)) { /*栈顶车厢号等于被检查车厢号*/
printf("%d",Top(station));
Pop(&station);i++;
}
else
if ((3) ) {
printf(“error\n”);
return 1;
}
else{
begin= (4) ;
for(j=begin+l;j <=state [i];j++){
Push(&station, j);
}
}
}
else{ /*当栈为空时*/
begin=maxNo;
for(j=begin; j<=state[i];j++) {
Push(&station, j);
}
maxNo= (5) ;
}
}
printf("OK");
return 0;
}
Catalyst 3500(Cisco IOS系统)中配置UplinkFast生成树可选功能的命令格式是——。
A.set spantree uplinkfast enable<cr>
B.set spantree uplinkfast enable rate<station—update—rate><cr>
C.spanning—tree vlan<vlan>root primary
D.spanning—tree uplinkfast<cr>·
请在第41处填下正确答案。
A.30FT
B.FEU
C.TEU
D.10FT
(71) A.HDLC
B.Frame. Relay
C.X.25
D.X.21
(72) A.a peer to peer
B.a point-to-point
C.not a peer to peer
D.a peer to peers
(73) A.a primary station
B.one or more primary stations
C.a secondary station
D.one or more secondary stations
(74) A.a primary station
B.one or more primary stations
C.a secondary station
D.one or more secondary stations
(75) A.half duplex
B.full duplex
C.half or full duplex
D.half and full duplex
Both bus and tree topologies are characterized by the use of multipoint (71) .For the bus,all stations attach,through appropriate hardware (72) known as a tap,directly to a linear transmission medium,or bus.Full-duplex operation between the station and the tap allows data to be transmitted onto the bus and received from the (73) .A transmission from any station propagates the length of the medium in both directions and can be received by all other (74) .At each end of the bus is a (75) ,which absorbs any signal,removing it from the bus.
(71)
A.medium
B.connection
C.token
D.resource
A.全站仪
B.精密经纬仪
C.简易经纬仪
D.连通水准管
E.挂罗盘